Next generation RF Power Amplifier
The Tricom Research TCR-NXG-50 is a true simultaneous dual-channel multiband networking RF Power Amplifier designed to extend the range and performance of modern tactical communication radios.
Our innovative software-defined architecture ensures compatibility with all legacy, frequency agile, and networking waveforms operating in the 30-2600 MHz band.
The form factor is ideal for use in mounted configurations whether vehicular, maritime, or airborne.
Requires no radio control or communication; fully independent operation minimizes the need for complex radio interfaces and costly dedicated vehicle adapters.
Related Products
INVISIO Intercom unit
The INVISIO Intercom is designed to bridge the gap between the dismounted and mounted professional by seamlessly integrating the INVISIO personal system and vehicle comms. Capable of connecting to 4 combat net radios, and 5 users for internal voice communication, the intercom has cable autosensing. It is a small and lightweight system that can be powered from a vehicle or common combat radio battery. The INVISIO Intercom weighs 563 grams and measures 150 x 95 x 27 mm.
GLI Cobra Repeater Kit
This equipment has received Safety of Flight Approval from the United States Air Force Air Mobility Command Systems Group. GLI-COBRA provides GPS (including GPS meeting the Army’s modernization requirements) coverage within any aircraft or ground vehicle. This means any handheld military or commercial GPS receivers, precision air drop guidance units and military free fall receivers acquire satellite signals inside the aircraft or ground vehicle. The warfighter will have satellite connectivity and situational awareness prior to dismounting a vehicle or exiting an aircraft. A GPS receiver will experience no loss in signal coverage as it moves in or out of any vehicle equipped with GPS Live Inside. Supports options not available in any other repeater Outperforms retransmission systems costing several thousand dollars more.
GLI Copperhead Repeater Kit
GLI-COPPERHEAD provides GPS (including GPS supporting the Army’s modernization requirements) coverage for the Mine Resistant Ambush Protected vehicle. This means carry-on military and commercial GPS receivers will get satellite signals inside vehicles like the MRAP. Soldiers have satellite connectivity and situational awareness prior to dismounting the vehicle. With GLI-COPPERHEAD, delays in acquiring GPS position are a thing of the past. A GPS receiver will experience no loss in signal coverage as it moves out of a MRAP or LAV when equipped with GPS Live Inside. Supports options not available in any other repeater Outperforms retransmission systems costing several thousand dollars more. GPS Retransmission technology developed by GPS Source, Inc. is currently utilized by Land Warrior units aboard Stryker, RG-33 and M1151 vehicles.
GLI Cottonmouth Repeater Kit
GLI-COTTONMOUTH provides GPS (including GPS supporting the Army’s modernization requirements) coverage for the High Mobility Multi-purpose Wheeled Vehicles. This means carry-on military and commercial GPS receivers will get satellite signals inside the HMMWV. Soldiers have satellite connectivity and situational awareness prior to dismounting the vehicle. A GPS receiver will experience no loss in signal coverage as it moves out of a HMMWV or LAV when equipped with GPS Live Inside. Supports options not available in any other repeater Outperforms retransmission systems costing several thousand dollars more. GPS Retransmission technology developed by GPS Source, Inc. is currently utilized by Land Warrior units aboard Stryker, RG-33 and M1151 vehicles.
GLI Viper Repeater Kit
This equipment has received Safety of Flight Approval from the United States Air Force Air Mobility Command Systems Group. GLI-VIPER provides GPS (including GPS supporting the Army’s modernization requirements) coverage within any aircraft. This means any handheld military or commercial GPS receivers, precision air drop guidance units and military free fall receivers acquire satellite signals inside the aircraft. The warfighter will have satellite connectivity and situational awareness prior to exiting an aircraft. A GPS receiver will experience no loss in signal coverage as it moves in or out of any aircraft equipped with GPS Live Inside. Based on technology developed for Boeing C17 Supports options not available in any other repeater Outperforms retransmission systems costing several thousand dollars more. GPS Retransmission technology developed by GPS Source, Inc. is currently utilized by Land Warrior units aboard Stryker, RG-33 and M1151 vehicles.
GPS 1×2 Military Tiny Qualified Splitter (MS12T)
A tiny qualified splitter that still delivers full-size performance, the MS12T is perfect for unmanned aerial vehicles (UAVs) or any other applications with size and weight constraints. It is standard configured with EMI Shielding, Waterproofing and is Hermetically Sealed for long-term durability in even the most rugged applications. The MS12T will allow the signal from one GPS antenna to be split between two GPS/GNSS devices. It can be configured to Pass DC from a connected receiver to also power an external GPS Antenna or both outputs can be DC blocked.
METRO “Smart” Amplifier
The METRO is a primary signal controller for GPS retransmission. It is an L1 or L1/L2 smart amplifier, designed for all applications that provides a calibrated 1dBm incremental output power control. When used in conjunction with an active GPS receive antenna, it will retransmit GPS signals inside a building, hangar or any structure where GPS is not available. It can be used in an automated test environment or in a shielded room that needs L1 or L1/L2 signal. A user can easily use a push-button control to precisely determine the output power of the METRO signal. This reduces the need for multiple antennas, and multiple antenna cable runs, while lowering maintenance and installation costs.
METROe “Smart” Amplifier
The METROe is a primary signal controller for GPS retransmission. It is an L1 or L1/L2 smart amplifier, designed for all applications that provides a calibrated 1dBm incremental output power control. When used in conjunction with an active GPS receive antenna, it will retransmit GPS signals inside a building, hangar or any structure where GPS is not available. It can be used in an automated test environment or in a shielded room that needs L1 or L1/L2 signal. A user can easily use a push-button control to precisely determine the output power of the METROe signal. This reduces the need for multiple antennas, and multiple antenna cable runs, while lowering maintenance and installation costs.